If you are a first-time pool filter owner and want to avoid making mistakes, there is a checklist that can guide you through the cleaning process. Pool filter cleaning is a common problem for pool owners that can be frustrating and costly. In some cases, it can cost thousands of dollars. Following the steps on the checklist can help you properly clean your pool filter and prevent any potential issues.
Why should we clean pool filter?
Your pool filter is essential for filtering the water, keeping it clean, and ensuring its safety. Because it is a crucial component of the pool’s filtration system, it must be frequently maintained. The monthly replacement of the pool filter is advised. To guarantee the best possible performance of the pool, it is advised to replace the filter at least once a year if it is part of a built-in filtering system. You can make sure that your pool is always secure and suitable for swimming by adhering to these maintenance procedures.
How to clean a cartridge pool filter
Your pool filter is essential for filtering the water, keeping it clean, and ensuring its safety. Because it is a crucial component of the pool’s filtration system, it must be frequently maintained. The monthly replacement of the pool filter is advised. To guarantee the best possible performance of the pool, it is advised to replace the filter at least once a year if it is part of a built-in filtering system. You can make sure that your pool is always secure and suitable for swimming by adhering to these maintenance procedures.
How to clean a sand pool filter
To clean a sand pool filter, you need to follow a simple process called backwashing. Firstly, turn off the pump and connect the backwash port of the sand filter to the swim hose. Then, select “backwash” from the multiport valve’s handle. Wait until the water in the sight glass becomes clear and restart the pump, letting the water rush through the backwash hose and out of the backwash port.
Once done, switch the multiport filter valve to the “rinse” position and run the pump for about a minute. Finally, restart the pump and return it to its initial configuration, which is usually used as a “filter”. It’s important to note that sand filters need to be cleaned regularly to keep your pool water clean and safe for swimming.
How to clean a D.E. Pool Filter
Cleaning a DE (diatomaceous earth) filter is similar to cleaning a sand filter, although there are some differences when it comes to replacing the medium. You will need a pool hose, garden hose, high-pressure nozzle, DE powder, and a DE scoop.
Begin by backwashing the filter using the same method as for a sand filter, and then open the air relief valve and remove the drain plug to drain the water from the tank. Follow the manufacturer’s instructions to disassemble the filter, remove the filter “fingers” or grid, and wash the tank and all the DE from the filter using a garden hose and high-pressure nozzle. Reinstall the grids and replace the lid, adding DE powder to the filter according to the manufacturer’s instructions.
Related review: Best suction pool cleaners
Conclusion
To get rid of sand in your pool filter, you can use a wire brush, sandpaper, or a power tool, and some people even use the hose end of a garden hose or tap water. Regularly replacing the filter is essential to ensure proper operation. Although some people skip this step as they believe it takes too much time and effort, it is recommended to replace the filter after each use to save time and effort on frequent cleaning.
John Smith 
Jayden Maverick