Overview
Even though it is technically possible to clean your pool with a brush and manual vacuum, few pool owners have the time or desire to do so, especially given that a pool needs to be cleaned at least twice a week during the in-season.
By automating the cleaning procedure, the best zodiac pool cleaner makes pool upkeep simpler. A 30- to 40-foot hose connects this style of pool cleaner to the pool skimmer. The debris is then delivered to the pool filter and pump skimmer basket as it mechanically glides around the pool floor and walls collecting silt, tiny leaves, and other waste.
Continue reading to find out what characteristics to look for in a suction pool cleaner and why the models listed below are some of the best available.
- Type 1: Best overall: Zodiac G3 Suction Pool Cleaner
- Type 2: Runner-up overall: Jandy Zodiac Mx6
- Type 3: Best design: Zodiac MX8 Suction Pool Cleaner
- Type 4: Runner-up design: Zodiac Ranger Suction Side Above-Ground Pool Cleaner
In-Depth Reviews for Top 4 The Zodiac Pool Cleaner
1. Zodiac G3 Suction Pool Cleaner
Specification
-
1,600 GPH compatibility
-
Weight: 21 pounds
-
Hose length: 39 feet
Reason to buy
-
Even with a low-speed pump, maintains great suction
-
Simple to customize pump hose portions
-
Disk can fit in corners
Zodiac G3 Suction Pool Cleaner is one of the top suction side pool cleaner solutions available because of its straightforward and efficient maintenance-free design. Even with weaker pumps, it uses a straightforward control valve to adjust water flow in order to retain sufficient suction power for scaling walls. Although it can struggle with heavier waste, a large 36-inch disk's outstanding suction to the pool's sides and floor allows it to remove a lot of debris with each pass.
Raised deflectors on the outside of the wheel make it easier to vacuum in nooks and crannies. With thirteen 3-foot pieces of top-notch hose, the Zodiac G3 has enough range for larger pools.
2. Jandy Zodiac Mx6
Specification
-
1,600 GPH pumps are compatible.
-
Weight: 10 pounds
-
Hose: 30 feet
Reason to buy
-
Cost-effective compared to other suction pool cleaners
-
Only requires a flow rate of 1,600 GPH.
-
Able to climb walls
This Jandy Zodiac Mx6 is a wonderful choice for individuals on a budget because it costs less than half as much as other suction pool cleaners. It has a straightforward layout that makes it simple to use and only needs 1,600 GPH to travel about the pool and scale walls.
Ten 3-foot hoses on the cleaner allow it to reach small to medium-sized pools. Due to its little size, it can be used with both above-ground and inground pools. Although it's a fantastic cheap choice, it's not the best for getting rid of heavier particles because it can clog the cleaner.
3. Zodiac MX8 Suction Pool Cleaner
Specification
-
1,200 GPH pumps are compatible.
-
36 feet of hose
-
18 and a half pounds
Reason to buy
-
Able to maneuver around barriers and tight angles
-
Adapts to different pool surfaces
-
Low flow rate is sufficient
This Zodiac MX8 Suction Pool Cleaner is the best option for keeping a bigger pool for people who have the money to pay for it. While only requiring a flow rate of 1,200 GPH, the Zodiac MX8's cyclonic vacuum technology retains as much suction power as competing suction cleaners. Its track-style wheels enable it to go around the surface of the pool, awkward crevices, and vertical walls, reducing the need for the cleaner to be followed by a pool brush.
The MX8 has a great range and works with a variety of pool surfaces, including concrete, tile, vinyl, and fiberglass. It also comes with a 36-foot hose.
4. Zodiac Ranger Suction Side Above-Ground Pool Cleaner
Specification
-
No compatibility
-
32 feet of hose
-
Weight: 15 lbs.
Reason to buy
-
Its design keeps it from becoming stuck on steps and ladders.
-
Less complicated to maintain and reasonably priced
This above-ground suction pool cleaner's straightforward construction makes it maneuverable enough to clean the tiny spaces of most above-ground pools. Its deflector shield, which keeps it from getting caught on above-ground pool features like steps, ladders, and sharp edges, is the vacuum's most important feature. It can move across the pool's bottom and walls because of its disk form.
A self-adjusting valve maintains great suction and requires less maintenance or replacement because there is only one moving component. The vacuum's 32-foot line is more than long enough to clean even larger above-ground pools.
FAQs
1. How often should I use it?
During the swimming season, when the pool's cover is off, use the suction pool cleaner around twice a week. Remove the cover during the off-season, and run the cleaner about once a month.
2. How long will a suction pool cleaner last?
When maintained properly, an excellent suction pool cleaner will last 5 to 7 years.
3. What distinguishes a pressure pool cleaner from a suction pool cleaner?
Using a hose connected to the pool filter and pump basket, a suction pool cleaner removes particles by fastening itself directly to the pool skimmer. The return jet of your pool's pump and filtration system is where a pressure pool cleaner is connected. The way it operates is by sucking up dirt and dumping it into a bag that is attached to the cleaner itself.
The Zodiac G3 Suction Pool Cleaner is the best zodiac pool cleaner because of its straightforward, no-maintenance design and capacity to maintain adequate suction even at low pump speeds. The Zodiac MX8 Suction Pool Cleaner, with its enhanced ability to scale walls and navigate through tight corners, is a high-end pool suction cleaner that is suitable for large pools.